Heavy duty porch swing – Hanging a swing is one of the signs that summer is almost here. Usually a swing is at the end of a porch where people can swing without interfering with those who use the porch. Mount the swing sufficiently far from the rear rail so that it will not hit the railroad under normal conditions of use. Also, place the swing at a comfortable living room height. The length of your swing chains depends on the type of swing and the height of the roof of the porch.
Examine your heavy duty porch swing. If you have an older swing, check it out before each solid season. Look for rotten wood, rusty metal and failing screws, nuts or screws. Rolled outlets and rough and uneven surfaces are other signs of problems. Repair all problems before mounting your swing. Check mounting points to make sure they are secure. You will usually have two on each side: the front of the arm and the upper back of the seat back.
12 Picture Gallery: Best Heavy Duty Porch Swing
Then, measure the heavy duty porch swing width of the gantry from the mounting holes on each arm or side. Also transfer this measurement to the roof of the porch. Use a stud finder to locate a solid beam close to where you want to mount the swing. Drill a pilot hole in the bundle and screw the galvanized hook into the hole until no wires are visible. The screw must be tight. Repeat for the second hole.
This post topic: Porch